2nd Gen Disc Lock Tool 7.5 (Type 2)

Product Overview

The 2nd Generation Disc Lock Tool 7.5 (Type 2) is the compact setting element of the 7.5 mm second-generation tubular family, used to hold and reseat the disc wafer ring while a cylinder is stripped, cleaned or reassembled, and to correct a disc that has slipped out of its gate position. The 7.5 mm body is turned for that specific second-generation bore and carries the Type 2 disc stepping, so it is not interchangeable with the 7.0 mm or Type 1 tools. A low-cost bench essential for locksmith workshops and machine-lock repair benches.

Key Features

• 7.5 mm second-gen bore - turned to the 7.5 mm second-generation tubular diameter for a snug, rattle-free fit.
• Type 2 disc stepping - matched to the Type 2 disc pattern of the 7.5 mm family.
• Disc ring retention - keeps the wafer ring square while the cylinder body is opened or closed.
• Quenched steel body - heat-treated stock holds diameter and edge through repeated bench cycles.
• Knurled handling area - firm fingertip control when reseating a stiff disc stack.
• Bench economics - priced so a workshop can keep a spare for every second-generation size.

Specifications

Compatibility

• 7.5 mm second-generation tubular (disc) cylinders, Type 2 disc arrangement
• Coin-door and cabinet tubular locks built to the 7.5 mm second-generation bore
• Machine and utility enclosure cylinders of the same second-generation pattern
• Use as the setting companion to the 7.5 mm Type 1 tool for a complete 7.5 mm station

Wholesale & Shipping

Per-piece tiered pricing applies across the range, mixed orders with other tubular and civil tools consolidate into a single shipment, and worldwide tracked delivery is available.

Important Notice

For professional locksmith, property management and legitimate service use only. 18+. Not for unauthorized entry.